Printer User Manual
Table Of Contents
- 96/4635/180/2000 Series NPS/IPS Guide to Performing Routine Maintenance
- Table of contents
- Safety
- Introduction
- 1. Feeder trays
- 2. Output trays and bins
- 3. Fuser agent
- 4. Adding dry ink
- 5. Replacing the dry ink waste container
- 6. Cleaning
- 7. Maintenance and support services
- Index
Fuser agent
3-2 Guide to Performing Routine Maintenance
4. Put on gloves.
WARNING
Fuser agent contains silicone, which can cause irritation
upon contact with the eyes. Be sure to wash your hands
with soap and water after you finish this procedure.
5. Locate the fuser agent reservoir, pull it out until it stops, and
remove the reservoir cap by turning it counterclockwise.