Printer User Manual
Table Of Contents
- 96/4635/180/2000 Series NPS/IPS Guide to Performing Routine Maintenance
- Table of contents
- Safety
- Introduction
- 1. Feeder trays
- 2. Output trays and bins
- 3. Fuser agent
- 4. Adding dry ink
- 5. Replacing the dry ink waste container
- 6. Cleaning
- 7. Maintenance and support services
- Index
Feeder trays
1-8 Guide to Performing Routine Maintenance
NOTE: The way you load the paper depends on the paper
size required by the job. For paper longer than 14 inches,
load the long edge against the back guide.
7. Slide both length guides back against the paper.
8. Push the tray in slowly but firmly until it latches. Do not slam
the tray closed. This can cause improper latching or machine
damage.