Printer User Manual

XEROX DOCUPRINT 96/4635/180 NPS GUIDE TO PERFORMING ROUTINE MAINTENANCE vii
Introduction
The Xerox DocuPrint Network Printer Series, Guide to Performing
Routine Maintenance for Model 96, 4635, and 180 NPS, provides
information on how to perform basic maintenance tasks on the Xerox
DocuPrint Model 96, 4635, or 180.
About this guide
This guide is designed for operators whose job consists of operating
each of the system components, running print jobs, solving simple
system problems, and performing basic maintenance tasks, such as
replenishing dry ink.
Refer to the entire Xerox DocuPrint Network Printer Series for
information on other tasks required for printing with your DocuPrint
printer.
Users should have an understanding of Printer Controller operations.
Before using this guide, become familiar with its contents and
conventions.
Contents
This section lists the contents of this guide.
• Chapter 1, “Feeder trays,” provides information on how to load
feeder trays for your DocuPrint printer.
• Chapter 2, “Output trays and bins,” describes how to unload
output trays for the DocuPrint printer.
• Chapter 3, “Fuser lubricant,” describes how to refill the fuser
agent reservoir, and how to replace the pressure roll wiper.
• Chapter 4, “Adding dry ink,” describes how to add dry ink to the
printer.
• Chapter 5, “Replacing the dry ink waste container,” provides
information on how to replace the dry ink waste container.
• Chapter 6, “Cleaning,” provides instructions on how to clean the
various printing system components.
• Chapter 7, “Maintenance and support services,” provides
information on how to call for service, obtain documentation and
training, and report meter readings.