Printer User Manual

OUTPUT TRAYS AND BINS
XEROX DOCUPRINT 96/4635/180 NPS GUIDE TO PERFORMING ROUTINE MAINTENANCE 2-3
Once a bin is selected, the bin elevator lowers and the bin
cannot be used until it is emptied completely. When the bin
elevator stops in the down position, the Ready to Unload
indicator lights.
2. Open the bin doors, pull the platform out until it stops, and lift
the paper stack off the platform to a nearby table or paper cart.
Caution: Always use both hands to lift the paper stack out of
the bin.
3. Firmly push the platform back to its original position and close
the bin doors. The bin elevator rises, and the bin is again ready
for use.
Note: If the bin is not empty, the elevator remains down, and a
message appears on the printer control console and Printer
Controller display telling you to empty the bin.