Printer User Manual

FEEDER TRAYS
XEROX DOCUPRINT 96/4635/180 NPS GUIDE TO PERFORMING ROUTINE MAINTENANCE 1-3
Follow these steps to load feeder trays 1 and 2.
1. Select the tray you want to load by pressing the Tray Unlock
button on the door of the paper tray or by touching the
appropriate unlock icon on the printer control console.
Note: If the printer has stopped due to a low paper condition,
you do not need to press the Tray Unlock button.
2. Wait until the Ready to Open indicator lights.
3. Pull the feeder tray out until it stops.
4. Pull out any partially fed paper from the feeder assembly and
discard it. There will be some resistance.
5. Squeeze the lever against the back of the length guide and slide
the guide toward the back of the printer.
6. Remove any paper remaining in the tray and set it aside to be
placed on top of the new paper.