Instruction Manual

Printing using Xerox utilities and lpr utilities (DOS and UNIX)
Guide to Submitting Jobs from the Client 3-7
Entering paper opacity, paper prefinish and paper weight are
optional. However, when paper weight is specified, opacity
and prefinish values must also be specified in their correct
positional order.
NOTE: Mixed paper sizes are currently supported using
pageExceptions.
– Values for opacity: “opaque,” “transparency”
– Values for the prefinish option with their corresponding
default values for holes and tab orders are as follows:
NOTE: The value “plain” for prefinish causes the “type”
portion of the Media to be blank.
The value “opaque” for opacity causes the “type” portion
of the Media to be blank.
– Default values for opacity and prefinish are “opaque” and
“plain,” respectively.
Sample usage for this option:
-pageException 2 4 letter pink opaque drilled 3 5 40
where:
2 = beginning page
4 = ending page
letter = papersize
pink = color
opaque = opacity
drilled = prefinish
3 = with holes
5 = tab order
40 = weight
• -pagesToPrint <#> <#>
Specifies the starting and ending page numbers to print. You
cannot enter 0, and the second number must be greater than
or equal to the first number.
plain 0,0
drilled 0,5
precutTab 0,5
fullcutTab 0,0
drilledPrecutTab 3,5
drilledFullcutTab 3,0