Instruction Manual

DocuPrint and DocuColor 2060 NPS/IPS client overview

Guide to Submitting Jobs from the Client 1-7

The job status command (

lpq

) is available at client

workstations unless your TCP/IP network communications

utilities do not support it.

• Xerox Client Software provides commands for listing the

status of the job (

listjob

) and for listing the queue (

listq

These commands are available for jobs submitted using

Xerox Client Software.

• AppleTalk provides job status information at the client

workstation through the print monitor function. Workstation

users can also determine the status of a queue.

The following table describes the job status capabilities of the

various workstations.

Table 1-2. Job status reference

Platform Job status capability

Sun Workstation • Job status is available by issuing the appropriate command at the command

line.

• Job status information is available for jobs submitted using Xerox Client

Software.

PC • Job status is available depending on the TCP/IP software installed on the

workstation. You must issue the appropriate command at the command line.

• Job status information is available for jobs submitted using Xerox Client

Software

(via DOS).

• Job status information is available using the Novell PCONSOLE utility if the

printer is configured as a remote printer or print server.

Apple Macintosh Job status information is available at the workstation through AppleTalk.

IBM RS/6000,

HP/Apollo and

DEC Alpha UNIX

Job status information is available for jobs submitted using Xerox Client Software

and by using the

lpstat

command for jobs submitted using the

command.