Instruction Manual

Submitting print jobs from Quick Print for Windows NT 4.0
6-8 Guide to Submitting Jobs from the Client
Resetting a job ticket
To reset print parameters to the default job ticket parameters:
1. Access the Setup window. Refer to “Setting up a job ticket” if
required.
2. From the Setup window, click the Reset with default job ticket
icon on the bottom left side of the window.
3. Click [OK] to change the printing and finishing options back to
their default values, or click [Cancel] to leave the print and
finishing options as they are currently displayed.
NOTE: The default ticket values are those identified in the
Preference tab. Refer to the “Setting print preferences” section.