Network Printer Specification Sheet

PRINTER CONTROLLER MESSAGES
48-24 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE
F157 Output device input jam,
late arrival to entry
sensor/switch.
Stacker entry sensor: 2
bin stacker.
Stacker input jam switch:
1 bin stacker/Stitcher-
Stacker
Output device input jam.
1. Follow instructions on console to locate and clear
jam.
2. Close the stacker covers.
3. Press the Continue button.
4. If problem persists, notify your service representative.
F158 Stacker jam, late
departure from stacker
entry sensor or Dynamic
Stray Check fault,
unscheduled sheet is
detected and stopped at
the stacker entry sensor.
The paper failed to leave the stacker entry.
1. Follow instructions on console to locate and clear
jam.
2. Close the stacker covers.
3. Press the Continue button.
4. If problem persists, notify your service representative.
F159 Stacker front door open. The door was open during printing.
1. Discard the purged output.
2. Close the stacker door.
3. Press the Continue button.
F160 Stacker top cover open. The cover was open during printing.
1. Discard the purged output.
2. Close the stacker cover.
3. Press the Continue button.
F161 Stacker jam, late arrival at
bin #1 sensor.
The paper failed to arrive at Bin 1 in time.
1. Follow instructions on console to locate and clear
jam.
2. Close the stacker cover.
3. Press the Continue button.
F162 Stacker jam, late
departure from bin #1
sensor.
The paper failed to leave Bin 1 in time.
1. Follow instructions on console to locate and clear
jam.
2. Close the stacker cover.
3. Press the Continue button.
F163 Stacker jam, late arrival at
bin # 2 sensor.
The paper failed to arrive at Bin 2 in time.
1. Follow instructions on console to locate and clear
jam.
2. Close the stacker cover.
3. Press the Continue button.
Message Explanation/action