Network Printer Specification Sheet

PRINTER CONTROLLER MESSAGES
XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE 48-11
Queuing is Started.
Scheduling Policy: resourceMatch
PS-admin>
Message Explanation/action
C069 Paper tray 3 fault -- Select
another tray.
The tray 3 elevator has not reached the end of its travel in
9 seconds.
1. Open the HCF front door.
2. Open and close tray 3.
3. Close the HCF front door.
C070 Check paper supply in
tray 3.
The stack height sensor does not see paper.
1. Clear the tray 3 feeder.
2. Load and close paper tray 3.
3. Press the Continue button.
C071 Tray 3 wait station sensor
not made, but SFRS
made.
The paper failed to reach the wait station sensor in time, or
there was no paper at the wait station when attempting to
feed.
1. Clear the tray 3 feeder.
2. Press the Continue button.
C072 Sheet did not clear tray 3
wait station sensor.
1. Clear the tray 3 feeder.
2. Press the Continue button.
C073 Tray 3 feeder failed to
feed sheet from stack to
SFRS.
The feeder failed to move a sheet from the stack to the
stack force relief sensor within the allotted time.
1. Clear the tray 3 feeder.
2. Fan the copy paper stack (tray 3).
3. Load and close paper tray 3.
4. Press the Continue button.
C074 Tray 3 has low paper. The tray 3 elevator was raised with insufficient paper, or
the paper supply was nearly depleted during printing.
1. Clear the tray 3 feeder.
2. Load and close paper tray 3.
3. Press the Continue button.
C075 Tray 3 down due to
unlock button being
pressed.
The tray 3 unlock button was pushed, and the tray is down.
1. Open tray 3.
2. Load and close tray 3.
3. Press the Continue button.