Network Printer Specification Sheet

UNIX WORKSTATION MESSAGES
52-4 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE
Error copying STANDARD-INPUT
Your software is missing an internal file that is needed for printing.
Action Verify that the directory /usr/spool/xerox/qtmp exists and that you
have read and write access to it. Ask your system administrator to
verify that the installation procedure was successfully completed.
Error getting initial working directory
Your client software was unable to access the initial working
directory.
Action Verify that you have access to the directory that holds the client
software.
Error getting unique data filename
The print command was entered, but an internal error occurred while
the system was creating a unique filename.
Action Write down the message and contact your system administrator.
Error opening configuration file: <path>
The listjob, listq, or print command was entered, but the software is
unable to communicate with the Printer Controller.
Action Write down the message and contact your system administrator to
verify that the client software was properly installed.
Invalid indirection file
In entering the print command, an indirection file pathname with the
-@ option was specified. That pathname was inaccessible or
contained invalid characters.
Action Refer to the Guide to Submitting Jobs from the Client for the proper
syntax and characters for this option.
Invalid option: <>
In entering the print command, an invalid option was specified.
Action Refer to the Guide to Submitting your Jobs from the Client for
acceptable options.
JobTicket conflict: <-c1> and <-c2> are
mutually exclusive!
The print command was entered, but two options (<-c1> and <-c2>)
that cannot be used on the same print request were specified.
Action Choose which option you want to use and resubmit the job.