Network Printer Specification Sheet

DOS WORKSTATION MESSAGES
MESSAGES GUIDE 51-7
Server or directory unreachable
You entered the listjob, listq, or print command, but the software
couldn’t communicate with the Printer Controller.
Action Write down the message. Ask your system administrator to check
communication between your workstation and the Printer Controller
and to verify that the installation procedure was successfully
completed.
SetOfDisp__Create()
The print command was entered, but an internal error occurred.
Action Write down the message and contact your service representative.
SetOfDisp__Insert()
The print command was entered, but an internal error occurred.
Action Write down the message and contact your service representative.
System error
The listjob or listq command was entered, but an internal error
occurred due to one of the following conditions:
• Lack of memory
• Inability to open a local temporary file
• Network error.
Action Write down the message and contact your service representative.
Too many arguments
In entering the print command, more than 128 arguments were
entered in the command line.
Action Reenter the command with 128 or fewer arguments. Refer to the
Guide to Submitting Jobs from the Client for the correct syntax for
the print options.
Unable to find listfile
In entering the print command, a required value for the -listfile option
was not specified.
Action Reenter the print command, making sure you specify a value for this
option. Refer to the Guide to Submitting Jobs from the Client for
acceptable values.