Network Printer Specification Sheet

WINDOWS WORKSTATION MESSAGES
MESSAGES GUIDE 49-47
Uncollated transparencies cannot be stapled or bound.
You selected [Uncollated] as the collation option in the Setup dialog
and you selected [Portrait Staple], [Landscape Staple], [Dual Staple],
or [Bound] as the Finishing option with a paper stock type of
[Transparency].
Source DocuPrint print driver
Action Perform one of the following steps:
• Select the [Collated] option if you wish to use the paper stock
type and the Finishing option that you have selected.
• Select a paper stock other than [Transparency] if you wish to
use the collation option and the Finishing option that you have
selected.
Uncollated transparencies cannot be stapled.
You selected [Uncollated] as the collation option in the Job Setup
dialog and you selected [Portrait Staple], [Landscape Staple], or
[Dual Staple] as the Finishing option with a paper stock type of
[Transparency].
Source DocuPrint print driver
Action Perform one of the following steps:
• Select the [Collated] option if you wish to use the paper stock
type and the Finishing option that you have selected.
• Select a paper stock other than [Transparency] if you wish to
use the collation option and the Finishing option that you have
selected.
Windows Help could not be opened. There may not be enough
conventional memory. Close some other applications and try
again.
An attempt was made to access the Windows Help option but there
is not enough memory to open the Help files.
Source DocuPrint Print Submission software
DocuPrint print driver
Action Close other applications or add more memory to your workstation.
XPPP cannot support any more applications. Close an
application that is using XPPP and try again.
An attempt was made to access the DocuPrint software or to print
from within the application too many times.
Source DocuPrint print driver
Action Locate and close some of the DocuPrint windows or close the
applications using the Xerox print drivers and try the operation again.