Network Printer Specification Sheet

WINDOWS WORKSTATION MESSAGES
49-14 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE
Found printer configuration information in old INI file. Would
you like to move the configured printers to the new INI file?
XDS has discovered configured printers from an older Xerox
document submission application and would like to make these
configured printers available to you.
Source DocuPrint Print Submission software
Action Select ’Yes’ if you wish to copy the configured printers from the old
INI file to the new INI file. Select ’No’ if you do not want this
information to be copied.
If Uncollated and ordered Custom paper type are selected, the
Order Count must be 1.
You selected [Precut Tab] or [Custom] ordered as the paper type and
you have entered an order count other than 1.
Source DocuPrint Print Submission software
Action Change the order count to 1 or select another paper stock type.
If Uncollated and Precut Tabs are selected, Tab Positions must
be 1.
Uncollated precut tabs can have only a tab position of 1.
Source DocuPrint Print Submission software
Action Perform one of the following actions to change the printing options
that were selected from the Job Ticket:
• Select [Collated] and try to print your job again.
• Select a paper type option other than [Precut Tab] and try to
print your job again.
• Enter a value of 1 for the tab positions and try to print your job
again.
Jobs cannot use more than two ordered stocks.
More than two paper stocks for the job were specified.
Source DocuPrint print driver
Action Examine your document and change the stock options.