Laser Printer Guide to Performing Routine Maintenance
INTRODUCTION
viii XEROX DOCUPRINT 4850/4890 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE
Contents
This section lists the contents of this guide.
• Chapter 1, “Feeder trays,” provides information on how to load
feeder trays.
• Chapter 2, “Output trays,” describes how to unload output trays
for the DocuPrint printer.
• Chapter 3, “Stitcher wire,” provides information on how to
continue printing when the spool is out of wire.
• Chapter 4, “Fuser lubricant and pressure roll wiper,” describes
how to refill the fuser agent reservoir, and how to replace the
pressure roll wiper.
• Chapter 5, “Inks,” describes how to add both black and color dry
ink, and how to replace the Customer Changeable Unit (CCU)
for the color dry ink.
• Chapter 6, “Waste containers,” provides information on how to
replace the developer and the dry ink waste containers.
• Chapter 7, “Bypass transport,” describes how to install and
remove the optional bypass transport.
• Chapter 8, “Cleaning,” provides instructions on how to clean the
various printing system components.
• Chapter 9, “Maintenance and support services,” provides
information on how to call for service, order supplies, and report
meter readings.
An index is provided at the back of the guide.