Document

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS1280-OS1282 Message file error messages
The message file containing the message that should be
displayed for the indicated task does not exist on the system
disk.
Note: Messages OS1280 and OS1282 should not appear. If one
of these messages should occur:
Action 1. Document circumstances of the message appearance.
2. Record any additional messages displayed in conjunction with
it.
3. Contact your systems specialist or Xerox Customer Service
with the above information.
OS1280 Message file is not defined. Requesting ******;
message file: **;
OS1282 Message file does not exist. Requesting task: ******;
Message file: **;
OS1283 Unexpected Barcode encountered
The IOT read a barcode when there should not have been one.
Action Abort the job and correct the job programming or continue the
job in the BAR OFF mode.
OS1285-OS1287 Message file error messages
The message file containing the message that should be
displayed for the indicated task does not exist on the system
disk.
Note: Messages OS1285 and OS1287 should not appear. If one
of these messages should occur:
Action 1. Document circumstances of the message appearance.
2. Record any additional messages displayed in conjunction with
it.
3. Contact your systems specialist or Xerox Customer Service
with the above information.
OS1285 Message does not exist. Requesting task: ******;
OS1287 Should not display this message. Requesting task: ******;
OS1290 Cluster file full
The file containing the list of clusters is full.
Action Delete one or more clusters, and retry.
Note: The file can only contain 152 clusters.
OS1291 Cluster name not defined.
or
Cluster <cluster-name> ***
Cluster has no current trays ***
You have entered a PQA command or a job start command
containing an undefined cluster or one with no current trays.
Action 1. Verify the clusters to be used for your job.
2. Reenter the PQA command.
6-20 XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE