Document

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS1225 Automatic recovery initiated
Automatic job recovery has been initiated at the system
controller display after a system rollover due to software failure.
Action Follow directions appearing at the system controller display to
complete the recovery process.
OS1230 Separate not permitted with destination configuration
This is a response to SEPARATE ON or SEPARATE OFF when a
two-tray stacker is not present.
Action None.
OS1235 CLP Commands not allowed while printing
A CLP command was entered. CLP commands may not be used
while the printer is active.
Action None.
OS1240 Status command inoperative
The <JOBS STATUS> key was pressed or the JOBS command
was entered. The system is unable to display status because a
file was not created at sysgen due to insufficient disk space.
Action 1. Delete files to create more space.
2. Compress disk.
3. Enter the SFS CREATE command to create a status file. (Refer
to your 4635 LPS Operations Reference chapter on system
and report accounting, including status file information, for
details.)
OS1245 STAFIL.SYS Initialization failure status inoperative
The SFS CREATE command was entered. The system is unable to
process the command because the file was not created at sysgen
due to insufficient disk space.
Action 1. Delete some files to create more space.
2. Compress disk.
3. Enter the SFS CREATE command to create a status file. (Refer
to your 4635 LPS Operations Reference chapter on tracking
system activity for additional information.)
OS1250 Accounting enabled
A disabled accounting function has been reinstated.
Action None.
OS1255 Accounting disabled
The accounting function is restricted. The system will not
process the ACCOUNT or REPORT command that has been
entered.
Action Obtain the correct password and log on at the correct level.
(Refer to your 4635 LPS Operations Reference chapter on setting
LPS parameters for additional information.)
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE 6-17