Document

IFU (INTERPRESS FONT UTILITY) MESSAGES
IF2330 Character x not found
The character shown in the message cannot be found within the
FIS font master.
Action 1. Verify that the character requested within the font profile is
the desired character.
2. Reenter the ADD command.
3. If the message reappears, contact your systems specialist or
Xerox Customer Support.
IF2332 Composite request (character x) requires RIP
The composite character requested in the font profile requires
RIP (raster image processor), which is not on your system.
Action None.
IF2336 Map x was not found in IPFNTS.SYS
The requested Interpress character mapping is not found in the
character mapping tables that are stored in the IPFNTS.SYS file.
Action Modify the font profile to refer to an existing map in the
IPFNTS.SYS file.
IF2342 Operation code must be a symbol
When entering the original command line, the system did not
encounter the READ or WRITE parameter.
Action Reenter the command line, specifying either a READ or WRITE
parameter.
IF2344 Operation code must be read or write
A READ or WRITE parameter was not specified in the command
line.
Action Reenter the command line, specifying either a READ or WRITE
parameter.
IF2346 Family xxx not found in family directory
In attempting to delete or list the requested family from the
directory, either the naming authority, character code, or type
style does not exist.
Action None.
IF2400 FIS name is not in easy value
The font name specified in the FIS font master does not match
the font name specified in the font profile.
Action None.
5-12 XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE