Document

4635 LPS ADDITIONAL MESSAGES
9045 Memory free error
Memory used by DDB (Dialog Data Base) functions cannot be
released back to Microsoft Windows.
Action 1. Restart the UI from Power On.
2. If the problem persists, call for Xerox Customer Service and
provide the UI Crash Log, if available.
9048 Not a reference file
The DDB (Dialog Data Base) data file is being used in the wrong
mode.
Action Select the OK header button to retry the process. If the problem
persists, contact Xerox Customer Service.
9049 Not a maintenance file
The DDB (Dialog Data Base) data file is being used in the wrong
mode.
Action Select the OK header button to retry the process. If the problem
persists, contact Xerox Customer Service.
9050 Dialog Release error
One or more DDB (Dialog Data Base) files in use were built for a
different version of the UI Dialog.
Action Select the OK header button to retry the process. If the problem
persists, contact Xerox Customer Service.
9051 Software version error
One or more DDB files in use were built by a different version of
the UI software.
Action Select the OK header button to retry the process. If the problem
persists, contact Xerox Customer Service.
9055 Disk I/O error code
MS-DOS has detected a disk hardware error or software data
error.
Action 1. Verify that all required files are installed.
2. Select the OK header button to retry the process. If the
problem persists, contact Xerox Customer Service to have
disk hardware checked for malfunction.
9056 Memory allocation error
Insufficient memory to allocate memory for internal DDB (Dialog
Data Base) operations.
Action 1. Restart the PC user interface hardware from Power On.
2. Ensure no other Microsoft Windows applications are running.
3. Select the OK header button to retry the process. If the
problem persists, call Xerox Customer Service and provide
the UI Crash Log, if available.
15-16 XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE