Document

PSC (PRINTER SUBSYSTEM CONTROLLER COMMAND) MESSAGES
PS9003 Wrong SCSI PROM Version—download unsupported.
Firmware download of the SCSI controller cannot take place due
to the presence of an outdated Prom on the SCSI controller.
The problem should be investigated by service.
Action None.
PS9005 Device failed self-test; image integrity uncertain.
The RIP board's power-on self-test failed. This message indicates
that the integrity and validity of output from this RIP board is
questionable.
Action Contact your systems specialist or Xerox Customer Service.
PS9010 ***FATAL ERROR***No header on RIPOS.SYS File.
The RIP operating system file has an unspecified problem.
Action Contact your systems specialist or Xerox Customer Service.
PS9011 ***FATAL ERROR***Problem with RIPOS.SYS File.
The RIP operating system file has an unspecified problem.
Action Contact your systems specialist or Xerox Customer Service.
PS9012 ***FATAL ERROR*** Problem with SCSIOS.SYS File.
There is a problem with SCSIOS.SYS. The data cannot be
downloaded to the SCSI controller.
Action None.
PS9013 ***FATAL ERROR*** No header on SCSIOS.SYS File.
There is a missing or improperly formatted header in SCSIOS.SYS.
The data cannot be downloaded to the SCSI controller.
Action None.
PS9960 Download error: SAN nn.nn
This message provides the Software Analysis Code (SAN) needed
by Xerox Customer Service to correct the download error.
Action None.
PS9961 Download error: SAN nn.nn
This message provides the Software Analysis Code (SAN) needed
by Xerox Customer Service to correct the download error.
Action None.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE 10-3