Document

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS6007 Ethernet tape job from this host type not supported.
The Ethernet tape contains information for which no PDL
statement exists and, therefore, cannot be incorporated into a
JSL (e.g., packing information). The tape cannot be used.
Action None.
OS6008 Problem with Ethernet tape, checksum failed, check tape.
The Ethernet tape has apparent data loss. The job will not print.
Action Check the tape at the host to determine where the problem
exists; recreate the tape ensuring that data is complete. (Refer to
Xerox 4635 LPS Tape Formats Manual.)
OS6010 Tape “LABEL ERROR” messages
In attempting to read a tape label, the system has not
encountered the label part indicated in the message. (Refer to
the glossary for explanation of abbreviations.)
Action 1. Enter the ABORT job command to cancel the job and clean
the magnetic tape drive to ensure that the read process was
not impaired. (Refer to the maintenance chapter in your
4635 LPS Operator Guide.)
2. Restart the job. If the message reappears, do one of the
following:
a. Press the <CON> key to resume processing. If other
“label error” messages or message OS6500 appear,
continue pressing the <CON> key until the job prints.
Note: Check output. One or more pages may be
formatted incorrectly and parts of the label may print as
data on a separate sheet.
or
Enter the ABORT “job” command to cancel the the job.
b. Check JSL, making any changes necessary. (Refer to your
4635 LPS PDL/DJDE Reference or 4635 LPS Operations
Reference chapter on setting LPS parameters for
additional information.)
c. If there are no JSL errors, enter the START n, DUMP
command to obtain a tape dump for analysis.
d. Recreate the job with correct tape labels. (Refer to your
4635 LPS Tape Formats Manual.)
OS6010 Label error: Invalid label format; Continue or Abort?
OS6011 Label error: Vol 1; Continue or Abort?
OS6012 Label error: HDR 1; Continue or Abort?
OS6013 Label error: UHL, TM, or HDR2; Continue or Abort?
OS6014 Label error: EOF or EOV; Continue or Abort?
OS6015 Label error: TM, HDR, or UHL; Continue or Abort?
OS6016 Label error: TM or USER; Continue or Abort?
OS6017 Label error: Tape mark; Continue or Abort?
OS6018 Label error: EOF; Continue or Abort?
OS6019 Label error: EOV; Continue or Abort?
OS6020 Label error: UVL or HDR 1; Continue or Abort?
OS6021 Label error: UTL, TM, or EOF; Continue or Abort?
OS6022 Label error: ANSI option 3; Continue or Abort?
OS6023 Label error: 1HDR; Continue or Abort?
OS6024 Label error: 1EOR, TM, or 1EOF; Cont or Abort?
OS6025 Label error: 1EOR or 1EOF; Continue or Abort?
6-76 XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE