Document

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS1800 Input processing aborting
the abort i command was entered. The input processing task is
stopped, and no more data is being sent. (The job has not been
deleted.)
Action None.
OS1805 Input processing aborting current report
The ABORT command was entered. The report currently being
input is aborting.
Action None.
OS1806 Input processing has aborted current report
The report being input when the ABORT command was entered
has been aborted.
Action None.
OS1809 Diagnostic print job aborted by x
The diagnostic print job attempted has been aborted by the
indicated source.
Action None.
OS1810 Printing aborting
The ABORT O command was entered. The job currently printing
is being discontinued. Sheets in the paper path are being sent
to a stacker tray.
The printer control console displays:
OUTPUT STOPPED--SEE MESSAGE AT CRT.
Action None.
OS1820 Output processing is aborting current report
The automatic job recovery attempt was unsuccessful. The
current report has been deleted.
Action Restart the job
OS1821 Cannot get LUN assignment. SDI aborted.
The system diagnostics interface (SDI) has been aborted because
the logical unit number (LUN) of the tape cannot be associated
with the specified file.
Action Exit diagnostics and REAllocate the print file before the next
diagnostic print request.
OS1822 Cannot write to diagnostic print file. TPJ aborted.
An error has occurred during diagnostic print mode initialization.
Action Exit diagnostics and REAllocate the print file before the next
diagnostic print request.
6-34 XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE