Operation Manual

Maintenance Xerox
®
DocuMate
®
6440
User Guide 33
Power Settings
• Sleep mode—sleep mode is the low-power state when the scanner is not in use. You can
adjust the amount of time you want the scanner to wait before it goes into low power.
Click the green enter button to save any changes in the Sleep mode field.
Click the red reset button to reset to the default timeout value.
• Power off—input the number of minutes you want the scanner to wait before it turns itself
off.
Click the green enter button to save any changes in the power off field.
Click the red reset button to reset to the default timeout value.
Counters—click the reset button next to the counter you want to set back to 0.
Driver Settings
The options in this panel are for configuring how the TWAIN interface will behave in some
scenarios. Please see the TWAIN scanning guide on the installation disc for instructions.
Adjusting the Paper Guides
The paper guides are designed to release from the channel in the scanner body. This prevents
damage to the paper guides while performing maintenance or removing the input tray. When
following the instructions in this section for troubleshooting and maintaining the scanner, please
make sure the paper guides are fully seated before closing the scanner.