Operation Manual

Welcome Xerox

DocuMate

5445 / 5460

User Guide 5

Control Panel

1. LED number—shows the OneTouch function that will be used for scanning. You can view the

scan settings for that function in the OneTouch Properties window. When there is a hardware

error, the LED number indicates what the hardware error code is.

2. LED function button—tap the button to cycle through the 9 OneTouch scanning options.

3. Scan type function button—tap the button to change the scan type between Simplex (one-

sided) and Duplex (two-sided) scanning. The option you select here overrides the selected

option in the OneTouch Properties window when you scan by pressing the green start button.

4. Power button—turns the scanner power on or off. Press the button to turn the scanner on.

Press and hold down the button for a couple of seconds to turn the scanner off. This is the

clear button on the control panel.

5. Reset button—returns the scan settings in TWAIN to the default settings. This is the yellow

button on the control panel.

6. Stop button—stops the scanner when scanning. This is the red button on the control panel.

7. Start button—starts scanning. This is the green button on the control panel.

8. Error light—this light will start flashing if the scanner experiences a hardware error.