Operation Manual

DocuMate 520 Scanner User’s Guide 117
Scanning with the ISIS Interface
Scanning with the ISIS
Interface
The ISIS interface for scanning is available from any One Touch
button that has Configure Before Scan set as the Configuration,
and ISIS selected as the interface to use.
The interface is also available from ISIS scanning applications. If
you are using an ISIS application to scan, please see its User’s
Guide for the steps to open the interface.
To open the ISIS interface from the One Touch application,
right-click on the Configure Before Scan configuration and select
ISIS from the menu.
When you press the button to scan (the Scan button in this
example), the One Touch ISIS Scan window opens. Use this
window to scan from either the ADF or the Flatbed, and to select
scanning options then start scanning.
Right-click on Configure
Before Scan to get the
menu, and choose ISIS
to use it as the interface to
configure before scan.