Operation Manual

Installation
12 DocuMate 510 Scanner Installation Guide
4. Turn on the power switch, located on the back of the scanner to
the right of the power port.
The status lights come on and flash indicating that the scanner
is receiving power.
Proceed to the next section, “Step 4: Connect the USB Cable”.
Step 4: Connect the USB Cable
Your DocuMate 510 scanner connects to any available USB port.
Check your computer’s manual for the USB port locations.
1. Plug the USB cable into the USB port on the scanner. The USB
port is identified by its USB symbol.
2. Plug the USB cable into a USB port on the computer, keyboard,
or into a USB hub.
NOTE: You do not have to shut off the power to your computer
when connecting the scanner to a USB port.
USB