Operation Manual

DocuMate 510 Scanner Installation Guide 11

Installation

Step 3: Connect and Power On the Scanner

Connect the ADF cable, connect the scanner to a power source,

and turn the power on.

To connect the scanner and turn the power on:

1. Plug the ADF cable into the ADF port on the body of the

scanner.

2. Plug the power supply into its power port on the scanner.

3. Plug the power cord into the power supply and then into a wall

outlet.

NOTE: Only use the power supply (ADP-20LB Rev. B made by

Delta Electronics, Inc.) included with your scanner. Connecting

any other type of power supply may damage your scanner and

will void its warranty.