Operation Manual

Xerox DocuMate 4799
User’s Guide
189
2. The following illustration shows the location of the glass in the scanner.
Use a soft cloth to wipe clean the glass. You can use a roller cleaning paper to clean the glass
plates if there is any sticky residue on the surface.
Cleaning the Paper Sensors
The scanner has several sensors to detect the status of the paper when it is in the scanner. You should
clean these sensors as part of your standard weekly maintenance of the scanner.
Note: Do not clean the sensors with the roller cleaning paper.
Preparation
• Turn off the scanner prior to cleaning the sensors.
• Locate the Blower Brush accessory that was provided with your scanner, this is what you will use to
clean the sensors.
• Remove the brush tip from the Blower Brush and set it aside, you will be using only the blower to
clean the sensors.