Operation Manual

Xerox DocuMate 4799
User’s Guide
145
Manual feed mode—select this option to enable a 30-second delay from when the last page is
scanned and when the scanner stops the scan job. This allows you to scan pages one at a time, or
multiple separate stacks of pages, and have all pages scanned be in a single scan job when scanning is
finished.
To scan using manual feed mode:
1. Press the ADF button on the scanner to switch the scanner to manual feed mode.
This adjusts the hopper input tray up so time is not lost between feeding pages to raise and lower
the tray.
2. Select Manual feed mode in the TWAIN interface.
3. Place the page(s) you want scanned in the input tray.
4. Press the start/stop button on the scanner to start scanning the page(s).
5. When scanning is finished, place the next page you want to scan and press the start/stop button
to scan that page.
6. When you are finished scanning all pages, press the start/stop button to stop the scanner, click the
Abort button in the progress window, or simply let the timer run out.