Operation Manual

DocuMate 262 Scanner User’s Guide 45
Scanning
Configuring Before Scanning
Sometimes, you may want to manually configure the scan settings
before beginning the scanning process. In that case, you select
Configure Before Scan as the Scan Setting. When you press a
scan button, one of the scanning interfaces appears for you to set
the scanning options.
To configure before scanning:
1. Open the One Touch Properties window.
2. Using the arrows, choose the button that you want to set to
configure before scanning.
3. Select the scan configuration Configure Before Scan.
4. Right-click on Configure Before Scan and choose an interface
to use for configuring before scanning.
TWAIN—The Basic Interface or Advanced Interface appears
for you to configure the scanning. See “Scanning from the
Basic Interface or Advanced Interface” on page 65.
ISIS—The ISIS Scan interface appears for you to configure the
scanning. See “Scanning with the ISIS Interface” on page 87.
WIA—The Windows Image Acquisition Interface (WIA)
appears for you to configure the scanning. See “Scanning with
the Windows Image Acquisition” on page 83.
5. Click OK or Apply on the One Touch Properties window.
NOTE: The WIA option is only available if your computer is
running Microsoft Windows XP or ME.
Click the arrows to
select the button.
Select Configure
Before Scan.
Right-click on
Configure Before Scan
to get the menu, and
choose the interface to
use for configuring.