Operation Manual

DocuMate 252 Scanner User’s Guide 79
Scanning from PaperPort
The Scan Info Box
The following figure shows the information on the Scan Info box:
Creating a New Advanced Interface Profile
You cannot change the settings of the preset profiles in the
Advanced Interface. However you can create new profiles and
save them for future use.
To create a new profile:
1. On the Advanced Interface, select one of the preset profiles, for
example, Black&White Configurations/Custom.
2. Adjust the settings as required and then click the Save As
button.
The Save Profile dialog box opens.
3. Type a name for the new profile and click OK. The name must
be at least two characters long.
Your new profile is added to the configuration list.
To change or delete a profile you created:
1. Select your profile from the configuration list.
2. Make changes to the profile as needed, and then click Save.
3. If you want to delete the selected profile, click Delete.
Location of the top
left corner of the
image in the
Preview window
Physical size of the
image to scan
Size of the file of the
scanned image
The space on your
computer’s hard drive
Current location of
the pointer as you
drag it on the
Preview window