Operation Manual

DocuMate 252 Scanner User’s Guide 15
Scanning
Check the Scan Setting Before Scanning
1. To check the scan setting before scanning, press, hold down,
and then release, either the Simplex or Duplex button.
The OneTouch Button Panel appears with the description of the
selected setting. This sample shows the current description of
setting 6.
The OneTouch Properties window for that setting also appears
in case you want to change scanning options before scanning.
You use this window to reset the configuration, destination
applications, file formats, and so forth. See “Configuring the
OneTouch Buttons” on page 20 to reset the settings.
2. Click the close boxes on the OneTouch Button Panel and the
Properties window to close them.
Press, hold down,
and then release
either button to
see the setting for
the selected LED
number.
This number corresponds
to the LED on the scanner.
The icon indicates the
Destination Application
for this setting.
The current name of the
setting.
Your document will be scanned with
these options for setting Number 6.