Operation Manual

DocuMate 252 Scanner User’s Guide 13

Scanning

When you press either the Simplex or Duplex button, your

document is scanned using the scan settings indicated by the LED

number. The scanned image is then sent to a software application

(known as the Destination Application) on your computer.

Load and Scan Documents

1. Make sure the output tray is fully extended, and adjust the

paper guide for the width of paper.

2. Load the documents with their tops into the automatic

document feeder.

For Simplex (one-sided) scans, load the documents face down.

For Duplex (two-sided) scans, the documents can be face up or

down because both sides are scanned.

NOTE: Remove any staples or paper clips from the documents

before loading them into the automatic document feeder. Staples

and paper clips can damage the feed mechanism.