Printer Quick Start Guide

DocuColor 7000AP/8000AP Quick Start Guide

Exercises

High Capacity Stacker 80 (HCS80)

Perform the following steps to clear the HCS80 jam

in the Bypass area and resume printing.

1. Remove any paper from the Top Tray.

2. Lift the HCS80 Top Cover.

3. Lift the green handle, or handles, indicated on

the UI and remove all paper in the Bypass

area. Remove paper only from the areas

indicated.

4. Close each green handle.

5. Close the HCS80 Top Cover.

6. If the UI indicates there is a jam in the digital

press, follow the instructions on the screen to

remove any paper in the area indicates. Refer

to the Jam Clearance section in the Problem

Solving chapter in this manual.

7. Follow the instructions displayed on the

digital press UI to resume printing.

High Capacity Stacker/Stapler (HCSS)/Common Stacker/Stapler (CSS)

Read the following steps for more information on

how to clear a jam.

1. Open the finisher Front Door. There are three

possible jam areas. Handle 1 moves down,

handle 2 moves to the right, and handle 3

moves up.

2. Remove all jammed paper only from the area

indicated on the Touch Screen and the

finisher Control Panel Display. Do not remove

paper from any other areas.

3. Reposition the handle.

4. Close the finisher Front Door.

5. Follow any instructions on the Touch Screen

to restart your print job.