Printer Operator Manual

DocuColor 8000/7000 Operator Manual
3-21
3. Accessories
Clear Bypass area jam
Perform the following steps to clear the HCS80 jam in the Bypass
area and resume printing.
1. Remove any paper from the Top Tray.
2. Lift the HCS80 Top Cover.
3. Lift the green handle, or handles, indicated on the UI and
remove all paper in the Bypass area. Remove paper only from
the areas indicated.
4. Close each green handle.
5. Close the HCS80 Top Cover.
6. If the UI indicates there is a jam in the digital press, follow the
instructions on the screen to remove any paper in the area
indicates. Refer to the Jam Clearance section in the Problem
Solving chapter in this manual.
7. Follow the instructions displayed on the digital press UI to
resume printing.