User guide
DTP34 DENSITOMETER
4
Instrument Interface
The Quick Cal Densitometer must be interfaced directly with one of the computer’s Serial Ports. Installation differs
slightly for Macs and PCs (see below). For attachment to a Mac Mini-DIN 8 Serial Port, you need to use the
optional adapter (P/N SE108-DB9PA-01).
NOTE: Quit all programs and shut down the computer before installing interface cabling.
Applying Power
CAUTION: Use only the 115V/230V Switching Power Supply (SE30-87) to power the instrument.
Power is supplied to the instrument when the Power Supply is plugged into the AC wall receptacle. The instrument
does not have a ON/OFF switch.
Mini-DIN 8 Plug
Power Input
(see next page)
SE108-94-
02
Interface Cable
SE108-DB9PA-
01
(Optional)
PC
DB9
MAC
Mini-DIN 8
SE30-87 Switching
Power Supply
Detachable Line Cord
(optional)
AC Wall
Receptacle
Power Input