User guide

DTP34 DENSITOMETER
11
Instrument Reset
The following procedure will reset the factory defaults to your X-RiteColor QuickCal Densitometer:
1. Disconnect power from the instrument.
2. Push and hold the Read Button while applying power to the instrument.
3. Hold the Read Button until the LEDs begin to flash red slowly.
4. Release the Read Button.
Service Information
The X-RiteColor Quick Cal Densitometer is covered by a one-year limited warranty and should be referred to an
authorized service center for repairs within the warranty period.
X-Rite provides repair service to their customers. Because of the complexity of the circuitry, all repairs should be
referred an authorized service center.
X-Rite will repair any instrument past warranty. The customer shall pay shipping and repair cost to the authorized
service center, and the instrument shall be submitted in the original carton, as a complete unaltered unit along with
all the supplied accessories.