Leaflet

C
C-6 Troubleshooting
Your printed file appears too
dark.
Adjust the Brightness option.
You can use the Brightness option when printing from an application or from the Fiery
Downloader to lighten your image whenever you print a PostScript or Encapsulated
PostScript (EPS) file.
Color output is incorrect.
Check with the operator or administrator about the current calibration information.
The copier may need to be recalibrated because it has been too long since it was
calibrated or because it is using a different target.
Color file prints in black and
white.
In the Color Matching dialog box, make sure that Color/Grayscale or ColorSync Color
Matching or PostScript Color Matching is selected (not Black and White).
Make sure that the Color Mode print option is set to CMYK and not Grayscale.
Desktop Color Separations
(DCS) format images print
incorrectly.
Make sure that you selected the correct options to send separations in the application’s
Print dialog box.
Make sure that you have the file for every layer of separation that you are printing.
Set the Combine Separations option to On.
This combines the high-resolution files for an image and prints them. With Combine
Separations Off, the low-resolution master file will print.
QuickDraw fill patterns print
as solids.
Use the Adobe PostScript Printer driver (or the Apple LaserWriter 8.3 or later printer
driver).
If this happens: Try this: