Leaflet

2
2-4 Printing from Mac OS Computers
7. Select the appropriate settings for your print job.
These print options are specific to the Fiery ZX (you must scroll to see all the options).
They override settings in Fiery ZX Printer Setup; the settings can also be changed in
the Properties dialog box with the Command WorkStation, or in the Override Print
Settings dialog box with the Fiery WebSpooler or Fiery Spooler. For information about
these options and overrides, see Appendix A, “Setting Print Options.”
If you choose Printer’s default, the Fiery ZX prints with either the default value for the
server, or the information entered during Setup.
Some PPD options are ones that could also be set from an application (for example,
Reverse Order printing or Collation). In these cases, use the PPD option to perform
the function, rather than setting it from the application. (The application may not set
up the file properly for printing on the Fiery ZX and may also take longer to process.)
8. If you want to make the new settings your default settings, click Save Settings.
9. Click Print to begin printing your job.