Leaflet

1
1-10 Printing from Windows Computers
3. Select the appropriate settings for your print job.
In the Paper Size menu, specify the page size that your job should print on.
In the Paper Source menu, specify the paper tray to use for the job. For example, you
can specify that the job should be printed on pages in the Manual Feed tray. The Paper
Source selection is valid for the current job only.
NOTE: If paper loaded in the selected tray is a different size, orientation, and/or media
type than that of the job you are sending, the Fiery ZX displays an error message and
the job will not print. You should then load the correct paper in the selected tray or
cancel the job.