Leaflet

1
1-7 Printing from applications
5. Select appropriate settings for your print job.
In the Paper Source pop-up menu, specify the paper tray to use for the job. For
example, you can specify that the job should be printed on pages in the Manual Feed
tray. The Paper Source selection is valid for the current job only.
In the Paper Size pop-up menu, specify the page size that your job should print on.
NOTE: If paper loaded in the selected tray is a different size, orientation, and/or media
type than that of the job you are sending, the Fiery ZX displays an error message and
the job will not print. You should then load the correct paper in the selected tray or
cancel the job.