Leaflet

1
1-3 Printing from applications
In the Paper size area, specify the page size that your job should print on.
In the Paper source pop-up menu, specify the paper tray to use for the job. For
example, you can specify that the job should be printed on pages in the Manual Feed
tray. The Paper source selection is valid for the current job only.
NOTE: If paper loaded in the selected tray is a different size, orientation, and/or media
type than that of the job you are sending, the Fiery ZX displays an error message and
the job will not print. You should then load the correct paper in the selected tray or
cancel the job.
6. To select a specific media type, click More Options.
7. In the Paper type pop-up menu, specify the type of media to use for the job and click
OK.