Digital Color Press Operator Manual

DocuColor 5252 Operator Manual
3-30
Overview
Job Monitor
The Job Monitor screen displays the options selected for the
current job and allows you to program features for the next job
while the current job is running. If there is more than one job
programmed in the digital press, the last job programmed appears
on the Job Monitor, not the job that is currently running.
Figure 3-20
The digital press may be programmed to accept Additional
Originals. This selection is activated in the Tools Mode. Refer to
the System Administration Guide for instructions (see page 2-52).
If Additional Originals is activated, the digital press looks for more
originals to be fed for a job until the Scanning Complete button is
pressed on the Job Monitor screen.