Digital Color Press Operator Manual

DocuColor 5252 Operator Manual
3-8
Overview
Circuit Breaker
The digital press is equipped with an additional safety circuit
breaker. This device will trip if there is an electrical overload.
Figure 3-5
In the case of a building power outage, the digital press should be
powered on as soon as possible after the power is restored, and a
print should be made to ensure that no damage to the digital press
has occurred.
If power to the digital press fails to return, do the following:
1 Locate the circuit breaker on the back of the digital press on the
electrical module next to the toner waste bottle.
2 If the device has been tripped, the switch will be in the Off position
(down). Flip the switch up to the ON position.
Note: If the Circuit Breaker trips again, or if power is not restored
by the above procedure, call your Xerox service representative.
Circuit Breaker
Ecology Module