Digital Color Press Operator Manual

DocuColor 5252 Operator Manual
9-9
Maintenance
9 Maintenance
4 To open the Reservoir Cap, grasp the tab at the back of the cap
and pull it forward.
5 Remove the cap from the bottle of Fuser Oil and replace it with the
Filler Spout Cap. This cap was provided to you when your digital
press was installed. Contact your Xerox service representative if
you cannot locate the Filler Spout Cap and need another one.
6 Carefully insert the Filler Spout into the opened Fuser Oil
Reservoir and squeeze the bottle until the oil reaches the
maximum fill level tab visible inside the Reservoir.
7 Remove the Filler Cap from the bottle and place it on a cloth or
paper towel to drain. Return the original cap to the bottle of Fuser
Oil.
8 Close the Reservoir Cap, ensuring that it snaps into place.
9 Close the Right Front Door of the digital press.