Digital Color Press Operator Manual

DocuColor 5252 Operator Manual
7-4
Problem solving
Problem Suggested Solution
Multiple sheets feed from the paper
trays.
• Do not fill the paper trays above the MAX fill line indicator.
• Remove the paper from the tray and fan the sheets to
separate the joined sheets.
• Predrilled sheets may stick together at the holes. Remove the
paper from the tray and fan the sheets to separate the joined
sheets.
• Paper and transparencies may stick together if environmental
conditions are too dry and cause excessive static. Increase
the humidity level in the room to minimize static.
• Gently fan transparencies to separate the sheets before you
load them.
Paper jams when exiting the Paper
Trays
• Ensure that the edge guides of the paper tray fit snugly against
the paper stack.
• Do not fill the paper trays above the MAX fill line indicator.
• Close the tray slowly to avoid shifting the paper stack.
Output jams when exiting the digital
press to the Offset Catch Tray
• When no other output device is present, the Offset Catch Tray
can hold up to 500 sheets of 24 pound (90 g/m
2
) paper. Empty
the catch tray when output approaches this limit to ensure
continuous production.
• Ensure the first sheet is not blocking the paper exit, particularly
for 11 x 17 inch (A3) output.