Digital Color Press Operator Manual

DocuColor 5252 Operator Manual
6-41
Accessories
6 Accessories
Paper specifications for stapling
The following chart shows the stapling details for paper size,
orientation, destination, and staple position. Numbers have been
rounded up or down.
Staple Positions marked with an "O" may
be selected in the position indicated.
Positions marked with an "x" are not
available for stapling.
*These items have the following limitation:
Papers that are 210 mm (8.3 in.) in the feed
direction must be greater than 80 g/m
2
in
weight.
Output
Destination
Staple Position
Output
Destination
Inches MM
Sheet
Orientati
on
HCSS Stack
Tray
64-220 g/m
2
(stapling)
Front
corner
Rear
corner
Dual
HCSS Top
Tray
64-280 g/m
2
(no stapling)
7.2 x 10.1
JIS B5 (182 x
257)
SEF Yes O x x Yes
8.3 x 11.7 A4 (210 x 297) SEF Yes O O x Yes
8.5 x 11 216 x 279 SEF Yes O O x Yes
8.5 x 13 216 x 330 SEF Ye s O O x Yes
8.5 x 14 216 x 356 SEF Ye s O O x Yes
10.1 x
14.3
JIS B4 (257 x
364)
SEF Yes O x x Yes
11 x 17 279 x 432 SEF Yes O x O Yes
11.7 x
16.5
A3 (297 x 420) SEF Yes O x O Yes
12 x 18 305 x 457 SEF No -- -- -- Yes
12.6 x
17.7
320 x 450 SEF No -- -- -- Yes
7.2 x 10.1 B5 (182 x 257) LEF Ye s * O x x Yes *
8 x 10 203 x 254 LEF Yes * O x x Yes *
8.3 x 11.7 A4 (210 x 297) LEF Yes O x O Yes
8.5 x 11 216 x 279 LEF Yes O x O Yes
10.5 x
15.3
Kai 8 (267 x
388) Asian
market size
SEF Yes O x x Yes
10.5 x 7.6
Kai 16 (267 x
194) Asian
market size
LEF Yes * O x x Ye s *