Digital Color Press Operator Manual

DocuColor 5252 Operator Manual
6-31
Accessories
6 Accessories
212 302 Top Cover open 1. Open Top Cover
2. Close the Top Cover
If the 212-302 Fault Code does not clear, ensure the Top
Cover is firmly closed.
212 540 Stacker tray full Empty the Stacker Tray.
212 541 Stacker tray position Press the Unload button. The Wait light blinks until the
Stacker Tray has reached the down position.
When the Stacker Tray has reached the down position, open
the front door.
Remove the Stacker Cart.
Remove all stacked paper.
Position the Stacker Cart securely into the EHCS.
Close the front door.
212 542 No Stacker Cart Open the front door.
Remove the Stacker Cart from the EHCS.
Position the Stacker Cart securely into the EHCS.
Close the front door
212 544 Door open Close the door
Ready Indicator
does not illuminate
No power • Check the power cord connected to the power source.
• Check that the GFI circuit breaker is not tripped (rear
cover).
• Check that the main switch is on.
Poor Stacking Mixed sizes of paper Run separate jobs and empty stacker.
High paper curl • Adjust digital press decurler.
• Flip paper in digital press paper tray(s).
• Rotate paper in the digital press paper tray(s).
Mechanical
obstruction
• Check for obstruction in the stacker paper path.
• Ensure that all transports and baffles are properly seated.
• Ensure that the cart is properly seated.
Paper Jams: Lower paper path Deselect offset or restart job.
High paper curl • Adjust digital press decurler.
• Flip paper over in the paper tray being used.
• Rotate the paper in the paper tray being used.
• Switch to heavier paper.
Fault Code Cause Solution