Digital Color Press Operator Manual

DocuColor 5252 Operator Manual
6-23
Accessories
6 Accessories
Unloading the Stacker Tray
Use the following procedure to unload the Stacker Tray when it is
full, or you want to retrieve a job that has been completed.
1 Press the Unload button on the Stacker Control Panel. The Wait
light blinks until the Stacker Tray has reached the down position.
2 Open the front door when the Unload Light illuminates.
3 Position the securing bar on top of the stacked paper.
4 Pull the Stacker Cart straight out.
5 Remove the securing bar.
6 Remove the paper from the Stacker Tray.
7 Push the empty Stacker Cart straight into the EHCS.
8 Position the securing bar on the fixed area inside the EHCS.
Note: The front door will not close if the securing bar is not
properly attached to the stacker frame.
9 Close the EHCS front door.
10 Follow the instructions displayed on the digital press Touch
Screen to resume printing.