Digital Color Press Operator Manual

DocuColor 5252 Operator Manual
6-21
Accessories
6 Accessories
Stacker Tray
Collated sets are transported to the Stacker Tray.
Bypass
The Bypass transports collated sets through the EHCS to a
connected finishing device.
Paper Guidelines
• Stacker Tray will accept 16 - 74 lb. (64 - 280 g/m
2)
- either
coated or uncoated stock with possibility of degraded stock
quality and increased jam rate
• Transparencies may be run to either the Top Tray or the Stack
Tray. Stack height should be limited to 100 transparencies.
• Coated paper lighter than 27 lb. (100 g/m
2
) may not run as
reliably as coated paper heavier than 27 lb. (100 g/m
2
).
• Nonstandard papers longer than 305 mm (12 in.) in the feed
direction require 210 mm (8.3in.) minimum measurement
across the feed direction.
• Nonstandard papers shorter than 254 mm (10 in.) in the cross-
feed direction require 330 mm (13 in.) minimum measurement
in the feed direction.
Recommended Baseline/Centerline
The following papers are considered to be baseline/centerline and
are recommended to ensure you receive the best quality from
your EHCS:
• Uncoated: Xerox Digital Color Xpressions +, 24 lb. (90 g/m
2
).
In Europe, Xerox Digital Color Colotech+ 90 g/m
2
.
• Coated: Xerox Digital Color Gloss Coated Text (120 g/m
2
/80
lbs.) In Europe, Xerox Digital Color Colotech + Gloss Coated
120 g/m
2
.